See some of our past electronic engineering projects. Although custom projects are welcome anytime, chances are that we have existing designs that cover the vast majority of your design needs and requirements. This allows us to be very competitive and responsive to tight deadlines. We have several controls representing technology that may be adapted to your specific requirements.
Protector Trap Button
Have your Gun Club’s trap button release switches let you down again? No matter what brand of clay target throwing equipment you use, Electro-Pro has a solution to this problem. Our line of Protector Trap Button release switches simply trade places with your current, failing release button(s).
The Protector Trap Button switches are totally 100% waterproof and will last a million cycles. We guarantee them for 1 year, and offer them with or without cords. Corded switches come in two lengths, 50 and 100 feet. (Longer cords can be special ordered if needed.) Your direct connector at the machine end will need to be transferred to the new cord by you.
The replacement Protector Trap Button can be changed in minutes, by anyone.
Put the reliability back into your Sporting Clays course today, by using Protector Trap Button.
Other Engineering Projects
Electro-Pro also has a selection of semi-shelf engineering projects that are available for immediate sale. Semi-shelf products offer the pricing advantages of off the shelf products; since the engineering and tooling costs have already been absorbed. These products also offer the advantages of custom designs; since Electro-Pro will customize the controls to your specific needs for a minimal charge. Please contact us for the detailed specifications and costs for the controls of interest.
Dish Washer Control
The microprocessor based control operates all of the normal functions of a typical low temperature dish machine. It takes input power from a standard 120VAC supply and has solid state outputs to control four different chemical dispense pumps and the drain solenoid. This dish washer control also provides a user interface with a LCD display to indicate system status and setup parameters. Cycle times are factory set, but allow adjustment by authorized service personnel.
Hot Food Station
The Hot Food Station microprocessor based control operates the normal functions of a six well heated food station. It takes power from a 90-250VAC, 50/60Hz single phase supply. This Hot Food Station control allows independent adjustment of the temperature of each well. It also provides an input for a temperature probe. There is also an LCD display for the user that has a membrane switch to control system setup. A real time clock allows automatic on/off control and power saving features.
Refrigerated Display Case
The refrigerated display case microprocessor based control system operates the normal functions of a refrigerated food display case. It takes power from a standard 120/240VAC supply and has solid state outputs to control the refrigeration system as well as humidification control and lighting. The control provides a user interface with a membrane switch and LCD display to control system setup. A real time clock allows automatic on/off control and power saving features.
Ice Maker Control
The ice maker control microprocessor based control system operates all the functionalities of an ice maker. It takes power from a standard 120/240VAC supply. It also has a combination of relay and solid state outputs to control the typical valves and solenoids on a standard ice maker. This control has LED’s to indicate system status and a communications port available for interface to a PC for field service or firmware updates.
Ice Agitation Timer
The ice agitation timer control takes power from a standard 120/240VAC supply and has solid state outputs to control the frequent agitation of ice in a storage bin. The agitation time and frequency is variable and adjusted via a potentiometer.
Electro-Pro’s complete list of semi-shelf controls includes: dispensing and food equipment, building environmental, communications, machine tools, automotive, and computer peripheral.